› 120pcs RGB + 200pcs White SMD-LEDs
› Edge mounted LEDs, 21mm ultra slim
› No fan, No noise
› 1:1 size, 70W power, 1500Lux @ 1meter
› Time-Division drive tech, ultra bright color light
› CCT/HSI/RGB/CIE/GEL/EFF color modes
› Built-in 20x Rosco and 20x LEE Gels
› 2800K-10000K, G/M±1.00 adjustment
› CRI Ra 96, TLCI 93
› On-board 3.5-inch color LCD visualized color pick
› DMX512 3bit/6bit/7bit color control
› DC 11-34V wide input voltage
› On-board V-mount or Gold mount battery plate
› IOS/Android APP bluetooth control
› With 4-leaf barn door and optional 40° honeycomb
70W Ultra Slim RGBW
VANGO-70, the slim portable size 70W
RGBW panel with extreme high color light
output, equivalent to regular 200W RGB
color light intensity, for your flexible video
studio setup.
21mm Ultra Slim and Soft
With SWIT unique Edge Mounted SMD and 90° high
efficient light guide tech, the VANGO-70 has an ultra
slim size to only 21mm thickness, and diffused to
soft light to paint the entire environment.
Time Division Tech, Brighter Color Light
The regular RGB panels are high bright in CCT mode, but much lower in
RGB color mode. That’ s because in a regular RGB light, the RGB color
LED and White LED have fixed rates to share the total power of the light,
and when output color lights, the RGB LEDs use only 1/3 power.
By SWIT unique Time Division Drive tech, full power of the light can be
assigned to RGB color LEDs, and greatly increased the intensity of color
light. The 70W VANGO-70 color light intensity equals to a regular 200W
RGB color light intensity.
IEC 62471 Photobiological Safe Certificated
The light has been tested and certificated as “Exempt - No Photobiological Hazard” by the IEC 62471:2008 standard, without the risk of ultraviolet radiation, high energy blue light, flicking. In specific locations such as churches, museums, and ancient buildings, using this lighting fixture can effectively prevent the fading and peeling of mural artifacts, thereby protecting cultural heritage.
Control Panel
VANGO-70 rear control panel supports 5-pin DMX
in & out, 4-pin XLR DC 11-36V in, and V-mount
battery plate (Gold mount for option), and a large
color LCD with menu and hot keys for convenient
color picking. The USB-A port is for firmware update
or user color profile upload, and to power wireless
DMX receiver.
On-board 3.5-inch Color LCD
Visualized color selection
Bluetooth APP Control
Download “SWIT Console” APP on IOS App Store or Google PLAY, to connect and control VANGO lights via Bluetooth.
SWIT Console APP
The APP control supports CCT, HSI, RGB, CIE color modes, and select preset color GELs and light effects.
LED | 120pcs RGB + 200pcs W SMD LEDs |
illuminance | 1500Lux @ 1m |
Beam angle | 65° |
Color Temperature | 2800K～10000K, G/M±1.00 |
CRI | 96 |
TLCI | 93 |
Power | 70W |
DMX | DMX512, 5pin XLR IN & OUT |
USB | USB-A power out & firmware update |
Input voltage | 4pin XLR, DC 11V～34V IN |
Dimension | 313×313×21mm |
Lighting area | 255×255mm |
weight | Net 4kg with barndoor; With package 6.55kg |
MSRP
MSRP
MSRP
-
AC power cable
-
Safety rope and Ring
-
Carrying Bag
-
AC-DC Adaptor
-
Barn door
-
LA-GE60N
Metal 40° Honeycomb, could be installed together with barndoor kit.
-
VANGO-100
100W 2:1 Ultra Slim RGBW Panel Light
Equivalent to 300W color light, 21mm slim, on board LCD, APP control
1. Warranty Period
We provide 1 year conditional warranty for lighting products.
2. Exclusions from Warranty Coverage
The following damages, malfunctions, failures, or safety incidents, including but not limited to damage to LED emitters, circuits, or housings, personal injury, or property loss, are not covered under warranty, and SWIT shall bear no liability therefor:
(1) Non-Compliance with Operating Procedures
Operation, installation, or removal of equipment and accessories not in accordance with the User Manual; forcible removal of connection cables or power cables; obstruction of heat dissipation vents; direct visual exposure to LED emitters; failure to follow the prescribed sequence for startup/shutdown or wiring.
(2) Non-Compliant Power Supply and Accessories
Use of non-original SWIT power supplies, power cables, chargers, optical accessories, or other uncertified third-party accessories; powering the product with third-party power adaptors; use of extension cables or power adaptors with mismatched rated parameters.
(3) Unauthorized Modification and Repair
Unauthorized disassembly, modification, or repair of the equipment; tampering with core components or circuits; failure to contact SWIT authorized after-sales service upon equipment malfunction, resulting in unauthorized repair or aggravated damage by non-authorized personnel.
(4) Misuse and Adverse Environmental Conditions
Damage resulting from dropping, impact, compression, puncture, water immersion, exposure to high temperatures or direct sunlight, extreme cold, humidity, excessive dust, or other non-normal use environments or human-inflicted damage.
(5) Failure to Address Abnormal Conditions
Continued operation despite abnormal conditions such as overheating, abnormal odor, or abnormal noise, resulting in damage or safety incidents; use of damaged or malfunctioning accessories or batteries in violation of regulations.
(6) Out-of-Specification and Incompatible Use
Operation beyond the equipment's rated parameters; use in incompatible systems or environments; failure to implement protective measures during outdoor use, resulting in damage from severe weather conditions.
(7) Force Majeure and External Factors
Damage caused by irresistible factors (including but not limited to earthquake, flood, or typhoon), sudden voltage fluctuations, or external circuit short circuits.
(8) Natural Wear and Tear
Normal aging of LED emitters, wear of accessories, and other natural degradation of the product.
(9) Improper Storage
Failure to store equipment and accessories in accordance with prescribed specifications, resulting in moisture ingress, dust accumulation, or component corrosion.
(10) Non-Authentic Products and Ineligibility
Products not purchased through official SWIT channels, or products with altered or missing serial numbers that preclude verification of authenticity and warranty eligibility.
(11) Liability Disclaimer
All risks and consequences arising from improper use, human factors, or external factors shall be borne entirely by the user.
(12) Non-Quality Defects
Any damage or breakdown not caused by the product's design, workmanship, or manufacturing quality.
