S-8PE6 Canon DSLR Battery Pack
› Li-ion battery pack of 7.2V nominal voltage
› Canon DSLR compatible battery
› Display remaining power info on DSLR
› 10Wh / 1.5Ah capacity
› Multiple circuit protections
Canon DSLR Replacement battery
For Canon EOS 5D2/3/4, 7D/2 and 6D/2
S-8PE6 is the replacement battery for Canon LP-E6, compatible with Canon DSLR
5D2, 5D3, 5D4, 7D, 7D2, 6D, 6D2 etc.
Canon DSLR can read the info of S-8PE6, display the remaining power level on
shoulder screen, and exactly power percentage in the menu system.
10Wh / 1.5Ah Capacity
With 7.2V nominal voltage, the S-8PE6 has 10Wh / 1.5Ah capacity,
and can be charged by Canon LC-E6 charger or SWIT 4-ch charger LC-D421.
Nominal Voltage | 7.2V |
Capacity | 10Wh,1.5Ah |
Max output power | 25W,3.5A |
Applicable camera | Canon EOS 5D2, 5D3, 60D, 7D, 6D, 70D |
Net weight | Net 72g; With package0.1kg |
Dimensions | 57×39×22mm |
| Charging Temperature | 0-40°C |
| Discharging Temperature | -20°C-50°C（Capacity and Max Load may decrease when operating below 0°） |
MSRP
$8222
MSRP
$8222
MSRP
$8222
1. Warranty Period
We provide 1 year conditional warranty for batteries.
2. Exclusions from Warranty Coverage
The following damages, malfunctions, failures, or safety incidents are not covered under warranty, and SWIT shall bear no liability therefor:
(1) Non-Compliance with User Manual
Operation, maintenance, or storage not in accordance with the instructions set forth in the User Manual; unauthorized disassembly, modification, or repair.
(2) Non-Compliant Charging Equipment and Practices
Use of non-original SWIT chargers or uncertified third-party charging accessories;
(3) Misuse and Physical Damage
Compression, puncture, dropping, impact, collision, water immersion, exposure to high temperatures or direct sunlight, or any other non-normal use not in accordance with the product's intended design.
(4) Use of Damaged or Defective Battery
Continued use of a battery that is damaged, leaking, or exhibiting abnormal overheating without prompt discontinuation.
(5) Natural Capacity Degradation
Reduction in battery capacity resulting from the natural aging process after a certain number of charge/discharge cycles.
(6) Improper Storage and Maintenance
Damage caused by improper storage practices that lead to extended deep discharge or prolonged zero-charge state of the battery.
(7) Force Majeure and Human Factors
Damage caused by irresistible factors (including but not limited to earthquake, fire, or lightning) or human factors.
(8) Non-Quality Defects
Any damage or breakdown not caused by the product's design, workmanship, or manufacturing quality.
(9) Liability Disclaimer
All risks and losses arising from non-compliant use shall be borne entirely by the user.
