You are at: HOME > Products > Monitor > On-camera > 5.5-inch FHD Waveform LCD Monitor
S-1053F
5.5-inch FHD Waveform LCD Monitor
◆ 5.5” LCD, 1920×1080 full HD
◆ Optical bonding LCD panel
◆ All metal housing, thinner and robust
◆ 2K/3G/HD/SD-SDI input and loop out
◆ HDMI input and converted to SDI out
◆ 16-ch Embedded audio meters with alert
◆ Select any 2 audio channels to output
◆ Waveform Y/Cb/Cr/R/G/B and single line
◆ Vector scope, histogram R/G/B/Y
◆ Peaking focus assist (dual color)
◆ AFD, timecode, H/V delay, Zebra stripes
◆ Marker 4:3, 13:9, 14:9, 15:9, 1.85:1, 2.35:1
◆ False color, R/G/B/Mono, 100% colorbar
◆ Various DV battery plate install
◆ USB firmware upgrade
S-1053F PDF
  • Product Overview
  • Technical Description
  • Specification
  • Accessories
  • Download
  • Related Products

5.5-inch Full HD LCD

Optical bonding

The S-1053F adopts a 5.5-inch LCD panel with LED backlight, optical bonding technical. The native resolution is Full HD 1920×1080, contrast 1000:1, and viewing angle is Horizontal: 160° / Vertical: 160°

 

 

 

 

All Metal Housing


S-1053F adopts aluminium alloy housing, thinner and robust, suitable for outdoor on-camera video monitoring.

 

Input/Output Interfaces

SDI & HDMI

S-1053F monitor supports:
2K/3G/HD/SD-SDI input × 1
2K/3G/HD/SD-SDI loop output × 1
HDMI input × 1 (with lock)
HDMI to SDI output × 1 (share SDI loop port)
Micro USB × 1 (firmware upgrade)
3.5mm analog audio output × 1

 

Build-in HDMI to SDI Conversion



S-1053F supports build-in HDMI to SDI conversion; share the SDI loop output port. It’s same format conversion and supports the following HDMI formats: 480i, 576i, 720p (60 / 59.94 / 50), 1080i (60 / 59.94 / 50), 1080p (30 / 29.97 / 25 / 24 / 23.98)
Note: When both SDI and HDMI input, if the current display source is SDI, the SDI output port is SDI loop; and if the current display source is HDMI, the SDI output port is HDMI conversion output.

Video Analysis Assistant Pattern


Waveform / Vector scope / Histogram


S-1053F supports video analysis assistant patterns includes: Waveform (Y/Pb/Pr/R/G/B), Vector scope, Histogram (R/G/B/Y), to convert the digital video quality info (Luma, Color, Saturation, etc) to patterns, and the patterns can be switched on/off individually, select display position (Up/Down/Left/Right), size, color, and translucence.

 

Embedded audio monitoring

Up to 16-ch meters with alert and select output

S-1053F supports SDI-16ch and HDMI-2ch embedded audio meters display, with marks and audio abnormal alert info. Users can also select any 2 channels audio to output via 3.5mm socket or speakers. The audio meter pattern position can be selected from one of four corners, and you can select to display only 2 channels, 8 channels, and full 16 channels. Also scale markers, alert info, and translucent of the audio meter pattern are selectable.

Peaking, R/G/B/Mono only, Zebra, False color


Timecode, H/V delay, AFD, Scale Markers


 

One-key Menu and Function Keys


S-1053F has a Revolve/Push Menu button, with one-button operation for menu system. On the top of the monitor there’re 3 user definable function keys, and under the menu system, press F3 at any time you can quit menu directly.
The F1-F3 support the following functions:
Input source switch, Max backlight, Waveform, Info display, Color temperature, Timecode, Zebra, Vector, Audio meters, Histogram, False color, AFD, H/V delay, R/G/B/Mono, scale markers, Colorbar, Audio alert, Peaking focus assist, Aspect ratio, Scan mode, Zoom mode, Mute, Freeze frame, Flip.

 

 

USB Firmware Upgrade

The monitor provides a Micro USB port on the side, for firmware upgrade. Users can download the latest firmware file to a USB stick, and insert into S-1053F monitor (via Micro USB OTG cable) to upgrade, without PC connection.

Various DV Plate Install


5.5mm lockable DC input


S-1053F supports DC 6.5-24V input via a 5.5mm lockable DC socket, and can install SWIT S-7003 series battery plate to be powered by DV batteries:

Model of plateCompatible batteries
S-7003FSONY NP-F970/770, SWIT S-8972, S-8970,
S-7003USONY BP-U60/U30, SWIT S-8U63, S-8U93
S-7003DPanasonic CGA-D54/D28, VW-VBD58, SWIT S-8D62, S-8D58
S-7003BPanasonic VW-VBG6, SWIT S-8BG6
S-7003VJVC BN-VF823, SWIT S-8823
S-7003iSSL-JVC50, SWIT S-8i50
S-7003CCanon BP-945/970G, SWIT S-8845, S-8945
S-7003ECanon LP-E6, SWIT S-8PE6

 

 

 

 

HDMI Connector with Lock


The HDMI input port of S-1053F is lockable designed. SWIT provides a special HDMI cable with lock for S-1053F monitor, and this HDMI connector can also work with normal standard HDMI cable.

 

 

 

Foldable Sun Hood

For outdoor using, the S-1053F provides a sun hood that is foldable designed and snap-on installation to the monitor.

Package Option


S-1053F offers the simple package and luxury package for option.
Simple package includes:
1x Foldable sun hood (A-SH53)
1x D-tap to lockable pole DC cable (S-7114)
Luxury package includes additional:
1x S-7003 series DV Battery plate (DV type optional)
1x AC-DC lockable power adaptor
1x Cold shoe / Screw Articulating Arm trestle
1x Lockable HDMI cable (80cm)
1x flannelette bag for monitor
1x Carrying case

Input Video Formats

S-1053F support the following input video formats:
InputSupported formats
HDMI 480i/ 576i / 480p / 576p
1080i (60 / 59.94 / 50)
720p (60 / 59.94 / 50)
1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)
SDISMPTE 2048-22048×1080p (23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60
2048×1080i (50 / 59.94 / 60)
SMPTE-425M1080p (60 / 59.94 / 50)
SMPTE-274M1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-RP2111080psf (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M720p (60 / 59.94 / 50)
SMPTE-125M480i (59.94)
ITU-R BT.656576i (50)












Waveform


Y/Pb/Pr/R/G/B and single line

The waveform is a pattern to measure and display the brightness and its distribution of every column of the input video, separates the Y, Cb, Cr, R, G, B channels, and support single line waveform. You can select 0-1079 lines of the image, to display waveform of this single line.
The color of waveform pattern can be selected from white, green and false color, and display position can be selected from 4 corners and center in larger size, also the translucence of the pattern can be adjusted.

Vector Scope


The vector scope pattern is to visualize the chrominance of input video signal by the distribution of color in the image on a circular scale. It represents saturation as distance from the center of the circle, and hue as the angle, in standard position around it. So you can see how saturated the image is and where the pixels in the image land on the color spectrum.
The vector scope pattern is divided into 6 districts, and stands for Red, Magenta, Blue, Cyan, Green and Yellow in different directions. The larger box stands for the color in 100% colorbar, and the smaller box stands for 75% colorbar. The color of vector pattern can be selected from white, green and false color, and display position can be selected from 4 corners and center in larger size, also the translucence of the pattern can be adjusted.

 

 

Histogram

R/G/B/Y parallel display

The histogram is a bar graph that shows the distribution of R/G/B/Y(Luma) values in the image. The histogram is takes broadcast standard safety highest value as 100%, and 107% as the real highest value. The R/G/B/Y distributions between 100% and 107% are considered as ineffective values in broadcast standard, and marked in yellow to warn.
The histogram pattern display position can be selected from 4 corners, and the translucence of the pattern can be adjusted.

Audio Meter Level


With alert info and select any 2 channels to output

Support SDI & HDMI embedded audio meters display, and 3G/HD-SDI displays 16-ch, SD-SDI displays 8-ch, HDMI displays 2-ch. The audio meter is green, and will turn yellow when exceeds -20dB, and turn red when exceeds -9dB. You can also select any 2 channels audio to output via 3.5mm socket or speakers.
The audio meters support audio abnormal alert info display, for example if the channel has no audio signal, the audio meter position will display “UNLOCKED”, and if the channel has audio signal but no volume, it will display “MUTE”.
The audio meters can be selected to display only 2 channels or only 8 channels, and support alert info on/off switch, markers on/off switch, and display position can be selected from 4 corners, also the translucence of the pattern can be adjusted.

USB firmware Upgrade

Operation Steps
1. Download latest firmware files (including Driver and Kernel) in USB disk - root directory.
2. Switch on the monitor, and insert USB disk into the Micro USB socket via OTG cable.
3. Enter Main Menu – System – Update Driver, select YES and the monitor will upgrade automatically, and will restart when upgrade finished.
4. Enter Menu – System – Update Kernel, select YES and the monitor will upgrade automatically, and will restart when upgrade finished.
Please DO NOT cut off power during firmware upgrade. It is suggested that you could connect both AC-DC adaptor and battery.


LCD Performance
Size5.5 inches
Display area120.96×68.04mm
Resolution1920×1080
Aspect ratio16:9 (4:3 adjustable)
Brightness 400cd/m2
Contrast1000:1
Color16.77 million colors
Viewing angleHorizontal: 160°Vertical: 160°
Input
BNC ×12K/3G/HD/SD-SDI input
HDMI ×1HDMI 1.3 input
Micro USB ×1Firmware upgrade
Output
BNC ×12K/3G/HD/SD-SDI loop output or HDMI converted to SDI output
3.5mm ×1SDI, HDMI embedded audio output
Video Format
SDISMPTE 2048-22048×1080p (23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60)
2048×1080i (50 / 59.94 / 60)
SMPTE-425M1080p (60 / 59.94 / 50)
SMPTE-274M1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-RP2111080psf (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M720p (60 / 59.94 / 50)
SMPTE-125M480i (59.94)
ITU-R BT.656576i (50)
HDMI480i/ 576i / 480p / 576p
1080i (60 / 59.94 / 50)
720p (60 / 59.94 / 50)
1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)
General
Working voltageDC / battery 6.5V-36V
Power consumption12W
Working temperature-10°C～+50°C
Working humidity10%～90%
Storage temperature-15°C～+60°C
Storage humidity10%～90%
Dimensions151×91×32mm
Net weight (main body)375g

S-7003U
SONY BP-U DV Battery Plate for S-1053F
SONY BP-U type battery mount with DC lead, can be installed on SWIT monitor S-1053F to power the monitor by SONY BP-U type battery.
S-7003B
Panasonic VW DV Battery Plate for S-1053F
Panasonic VBG6 type battery mount with DC lead, can be installed on SWIT monitor S-1053F to power the monitor by Panasonic VBG6 type battery.
S-7003V
JVC BN-VF Battery Plate for S-1053F
JVC BN-VF823 type battery mount with DC lead, can be installed on SWIT monitor S-1053F to power the monitor by JVC BN-VF823 type battery.
S-7003E
Canon LP-E6 Battery Plate for S-1053F
Canon LP-E6 type battery mount with DC lead, can be installed on SWIT monitor S-1053F to power the monitor by Canon LP-E6 type battery.
S-7003F
SONY NP-F Battery Plate for S-1053F
SONY NP-F type battery mountwith DC lead, can be installed on SWIT monitor S-1053F to power the monitor by SONY NP-F type battery.
S-7003I
JVC SSL Battery Plate for S-1053F
JVC SSL-JVC50 type battery mount with DC lead, can be installed on SWIT monitor S-1053F to power the monitor by JVC SSL type battery.
S-7003C
Canon BP DV Battery Plate for S-1053F
Canon BP-970G, BP-945 type battery mount with DC lead, can be installed on SWIT monitor S-1053F to power the monitor by Canon LP-E6 type battery.
S-7370
15mm Rod to 1/4" Articulating Arm
Can be fixed on standard Rig rods; 1/4" screw head on the other end.
S-7003D
Panasonic CGA/VBD Battery Plate for S-1053F
Panasonic CGA-D54, VW-VBD58 type battery mount with DC lead, can be installed on SWIT monitor S-1053F to power the monitor by Panasonic CGA/VBD type battery.
Hi-Res Picture
Download
S-1053F
S-1053F Hi-Res Picture
zip , 3782K
User Manual
Download
S-1053F.
S-1053F User Manual
pdf , 551K
WorldWide Distributor Info

Find the local distributor information
Download
Hi-Res Pictures, Brochures, Manuals
Email Newsletter
Email Newsletter Pleaseenter your Email address below and subscribe our newsletters.
 
Follow us at:
Contact us

Please contact SWIT at:

 

Telephone:+86-25-85805753
Fax: +86-25-85805796
Email: contact@swit.cc
Address: 10 HengTong Road, Xin’gang, Nanjing
Economic and Technological Development Zone
Nanjing, 210038, P. R. China.

 

 

 


©copyright 2013.SWIT Electronics Co.,Ltd Reserved
Home|Contact us|Products|Distrbutor

leave a message

For any inquiries, questions, suggestions to SWIT and SWIT products, please leave a message to us and we will reply you soon.
Your name: 
E-mail:    
Country:  
Message: