S-8110S 146Wh V-mount Battery Pack

›  Li-ion, 14.4V, 146Wh large capacity

›  D-tap output socket

›  4-level LED power indicator

›  V-mount connection

›  Multiple circuit protections

Features

V-mount Camera Battery

S-8110S is the V-mount rechargeable Li-ion battery pack for professional video cameras.

146Wh / 10.2Ah High Capacity

Consists of 16pcs 18650 battery cells, and reaches 146Wh/10.2Ah high capacity.
run approx 4 hours for normal 30W ENG cameras.

Reliable V-mount Connection

S-8110S is the standard V-mount connection and we adopt the high quality fiber glass V-wedge that ensures the reliable mounting.

Build-in D-tap DC Output Socket

A D-tap DC output socket is equipped on the top side of S-8110S battery, for DC14.4V (Nominate) connection, such as on-camera lights, monitors, wireless transmitter, etc..
The Max Power from D-tap is 120W, 10A.

4-level LED Power Indicator

On the side of the battery, there’re 4-level LED power indicators to check the battery remaining capacity. You can get a quick view of capacity before using.

Ultra Low Standby Power

Holds Power for Years Without Losing Charge

Ordinary batteries can be damaged after long-term storage due to complete power drainage.
SWIT batteries adopt a unique low-power design that could hold the charge for several years without losing power. There is no need for regular charge-discharge maintenance, just effortless, reliable storage when you need it.

无标题文档

Nominal Voltage

14.4V

Capacity

146Wh/10.2Ah

Max output power

In total:150W

Electrodes:150W,12A
D-tap:120W,10A

Mount Type

V-mount

Charging Temperature

0-40°C
     Discharging Temperature-20°C-50°C(Capacity and Max Load may decrease when operating below 0°

Net weight

Net 940g; With package1kg

Dimensions

165×90×51mm
Basic Package

MSRP

$8222

MSRP

$8222

MSRP

$8222

  • S-8110S

    146Wh V-mount Battery Pack

    Adpot high performance Li-ion battery cells with intelligent safety protection circuit; D-tap output, LED power indicators

    $8222
  • S-8110A

    146Wh Gold Mount Battery Pack

    Replacement: PB-S146A

    $8222
  • S-7010S

    V-mount plate with multi-DC out

    V-mount battery plate, with D-tap output, 7.2V pole-tap output and 5V/1A USB output sockets.

    $8222
  • S-7104

    D-tap to Pole-tap DC Cable

    Pluged into D-tap socket and output DC via 5.5mm pole-tap

    $8222

1. Warranty Period
We provide 2 years conditional warranty for batteries.


2. Exclusions from Warranty Coverage
The following damages, malfunctions, failures, or safety incidents are not covered under warranty, and SWIT shall bear no liability therefor:
(1) Non-Compliance with User Manual
Operation, maintenance, or storage not in accordance with the instructions set forth in the User Manual; unauthorized disassembly, modification, or repair.
(2) Non-Compliant Charging Equipment and Practices
Use of non-original SWIT chargers or uncertified third-party charging accessories;
Use of third-party USB-C chargers without compliant PD protocols;
Use of third-party D-tap charger of reversed polarity connections and cause any damage.
This battery doesn't support charging via D-tap, use any D-tap charger to charge the battery and cause any damage.
(3) Misuse and Physical Damage
Compression, puncture, dropping, impact, collision, water immersion, exposure to high temperatures or direct sunlight, or any other non-normal use not in accordance with the product's intended design.
(4) Use of Damaged or Defective Battery
Continued use of a battery that is damaged, leaking, or exhibiting abnormal overheating without prompt discontinuation.
(5) Natural Capacity Degradation
Reduction in battery capacity resulting from the natural aging process after a certain number of charge/discharge cycles.
(6) Improper Storage and Maintenance
Damage caused by improper storage practices that lead to extended deep discharge or prolonged zero-charge state of the battery.
(7) Force Majeure and Human Factors
Damage caused by irresistible factors (including but not limited to earthquake, fire, or lightning) or human factors.
(8) Non-Quality Defects
Any damage or breakdown not caused by the product's design, workmanship, or manufacturing quality.
(9) Liability Disclaimer
All risks and losses arising from non-compliant use shall be borne entirely by the user.


用户名
密码
登录

leave a message ↓

Name:
Country:
*E-mail:
*Msg:

We will collect your personal data requested by this registration in our databese, and the data will help us to give you the best possible services.

We will never reveal your personal informations to other purpose.You have a right to request your personal information to be deleted from our database at any time, by sending email to us: contact@swit.cc.