DB-DF570 Dual Side NP-F Dummy Battery with USB-C
› Dual side NP-F type dummy battery
› D-tap or USB-C PD Power Input
› 2× Dummy Battery Pins 8.4V/8A output
› USB-C PD 36W output ×1
› LED input voltage display
› For video devices with NP-F battery plate
Dual Side NP-F Dummy
The DB-DF570 is an innovative dual-sided NP-F type dummy battery adaptor, widely used for powering a variety of video devices. It is especially designed to mount a monitor and a wireless transmitter together and power them simultaneously via a D-tap interface or a USB-C interface.
D-tap or USB-C Power Input Source
DB-DF570 dummy battery supports D-tap 9-18V power input or USB-C PD 45W input, and converts to dual NP-F pins regulated 8.4V 8A output and USB-C PD 36W output.
Input Voltage Display
The LED display can show the real-time voltage of the input interface, whether it is D-tap or USB-C.
D-tap input | 9 - 18V |
USB-C input | 9V/12V/15V/20V, 2.25A |
USB-C output | 5V/9V/12V, 3A |
Battery pins output | 8.4V, 8A |
MSRP
MSRP
MSRP
-
S-8570
SONY L Series DV Camcorder Battery Pack
24Wh, for SONY cameras, Z-cam cameras, ARRI Hi-5 and various video gears.
-
DB-E6P
Canon LP-E6P USB-C Dummy Battery
USB-C input to LP-E6P dummy, for Canon EOS DLSR and mirroless cameras
-
DB-FZ100
SONY NP-FZ100 USB-C Dummy Battery
USB-C input to NP-FZ100 dummy, for SONY FX3, FX2, A7 series
We provide a 1-year conditional warranty, and the following damages/issues are not covered under warranty:
(1) Any damage or malfunction caused by use, maintenance, or installation not in accordance with the User Manual's instructions, including improper insertion into camera or power device, incorrect polarity connection, cable bending beyond recommended radius, or disassembly/repair without authorization of SWIT.
(2) Any damage caused by using third-party power supplies, batteries, chargers, or accessories that do not comply with the recommended electrical specifications, or by operating the product beyond its rated current, voltage, or load limits as stated in the technical specifications — including but not limited to melted insulation, burnt contacts, internal short circuits, or blown fuses resulting from over-current, over-voltage, or excessive load.
(3) Any damage caused by irresistible factors (such as earthquake, fire, lightning, flood, etc.) or human factors including crushing, pulling with excessive force, pinching, dropping, or improper storage in contact with sharp or heavy objects.
(4) Any damage or malfunction not caused by the product's design, workmanship, or manufacturing quality — including normal wear and tear of cable jackets, connector plating, strain relief boots, or contact spring tension.
(5) Physical damage to plugs, sockets, connector housings, locking tabs, or terminal pins resulting from violent use, improper insertion/removal, forced connection with incompatible ports, or pulling on the cable body instead of the connector is specifically excluded from warranty coverage. This includes bent, snapped, or cracked plug shells, broken latch mechanisms, separated solder joints from excessive strain, and deformed pin contacts.
(6) Electrical damage (including melted connectors, scorched dummy battery casings, deformed DC jacks, or cable insulation shrinkage) that is determined to be caused by connection to a power source or device exceeding the product's specified voltage, current rating, or duty cycle shall not be covered under this warranty.
