DB-FZ100 SONY NP-FZ100 USB-C Dummy Battery
› SONY NP-FZ100 dummy battery
› USB-C PD Power Input
› Dummy Battery Pins 8.4V/3A output
› For SONY FX3 / FX3A / FX30 / FX2
› For SONY A1 II / A9 / A9 III
› For SONY A7S III / A7R III / A7R IV
› For SONY A7C / A7C II / A7M III / A7M IV
› For SONY A6600 / A6700 / ZV-E1
SONY NP-FZ100 USB-C Dummy
DB-FZ100 is the SONY NP-FZ100 type dummy battery with USB-C port, allows you to power SONY cameras by external USB-C power source.
Compatible Cameras:
SONY FX3 / FX3A / FX30 / FX2;
SONY A1 II / A9 / A9 III;
SONY A7S III / A7R III / A7R IV / A7C / A7C II / A7M III / A7M IV;SONY A6600 / A6700 / ZV-E1.
Power Cameras by USB-C Source
You can use USB-C power bank, USB-C V-mount batteries or USB-C power adaptor to provide continuous power for SONY cameras, freeing it from the limitations of small battery capacity.
Livestreaming Video Applications
Especially during livestreaming or video shooting, using the DB-FZ100 Dummy Battery ensures uninterrupted power supply for extended recording, better heat dissipation, and enhanced safety and reliability.
USB-C input | 9V/12V/15V/20V 2.25A 45W |
Battery pins output | 8.4V, 3A |
Compatible battery | SONY NP-FZ100 |
Compatible cameras | SONY FX3 / FX3A / FX30 / FX2 SONY A1 II / A9 / A9 III SONY A7C / A7C II / A7M III / A7M IV SONY A6600 / A6700 / ZV-E1 |
MSRP
MSRP
MSRP
We provide a 1-year conditional warranty, and the following damages/issues are not covered under warranty:
(1) Any damage or malfunction caused by use, maintenance, or installation not in accordance with the User Manual's instructions, including improper insertion into camera or power device, incorrect polarity connection, cable bending beyond recommended radius, or disassembly/repair without authorization of SWIT.
(2) Any damage caused by using third-party power supplies, batteries, chargers, or accessories that do not comply with the recommended electrical specifications, or by operating the product beyond its rated current, voltage, or load limits as stated in the technical specifications — including but not limited to melted insulation, burnt contacts, internal short circuits, or blown fuses resulting from over-current, over-voltage, or excessive load.
(3) Any damage caused by irresistible factors (such as earthquake, fire, lightning, flood, etc.) or human factors including crushing, pulling with excessive force, pinching, dropping, or improper storage in contact with sharp or heavy objects.
(4) Any damage or malfunction not caused by the product's design, workmanship, or manufacturing quality — including normal wear and tear of cable jackets, connector plating, strain relief boots, or contact spring tension.
(5) Physical damage to plugs, sockets, connector housings, locking tabs, or terminal pins resulting from violent use, improper insertion/removal, forced connection with incompatible ports, or pulling on the cable body instead of the connector is specifically excluded from warranty coverage. This includes bent, snapped, or cracked plug shells, broken latch mechanisms, separated solder joints from excessive strain, and deformed pin contacts.
(6) Electrical damage (including melted connectors, scorched dummy battery casings, deformed DC jacks, or cable insulation shrinkage) that is determined to be caused by connection to a power source or device exceeding the product's specified voltage, current rating, or duty cycle shall not be covered under this warranty.
