S-7005A V-mount to Gold mount battery Adaptor
› V-mount camera to use gold mount battery
› New gold mount release button
› Metal V wedge
› D-tap DC output socket
› Smaller in size
› Stable and reliable connectivity
Adapt Gold mount battery to V-mount camera
S-7005A is used to adapt Gold mount batteries to SONY V-mount cameras.
The front side is Gold mount plate, to attach Antonbauer gold mount batteries, and the rear side is V-mount connection for the SONY V-mount cameras.
D-tap Output Socket
The S-7005A battery plate is equipped with a D-tap DC output socket, for simultaneous DC power output with the Gold mount pins.
Durable Release Button
S-7005A is equipped with a new battery release button, with outstanding feeling and resilience, and ensures the stable and reliable connectivity of battery,
Nominate Voltage | 14.4V |
Applicable battery | Gold mount batteries |
Applicable camera | V-mount cameras |
Dimensions | 119×85×24mm |
weight | 120g |
MSRP
$8222
MSRP
$8222
MSRP
$8222
We provide a 1-year conditional warranty, and the following damages/issues are not covered under warranty:
(1) Any damage or malfunction caused by use, maintenance, or installation not in accordance with the User Manual's instructions, including improper battery insertion or removal, incorrect polarity connection, exposure to moisture or conductive debris, or disassembly/repair without authorization of SWIT.
(2) Any damage caused by using third-party batteries, power sources, or accessories that do not comply with the recommended electrical specifications (e.g., voltage, current, or contact pin configuration), including but not limited to electrode overheating, melting, arcing, or short circuits resulting from incompatible battery design or poor battery quality.
(3) Any damage caused by irresistible factors (such as earthquake, fire, lightning, flood, etc.) or human factors including dropping the plate, impact damage, forced battery removal at incorrect angles, or insertion of damaged or deformed batteries.
(4) Any damage or malfunction not caused by the product's design, workmanship, or manufacturing quality — including normal wear and tear of spring-loaded electrodes, contact pins, locking mechanisms, or surface finish scratching.
(5) Electrode breakage, bending, or deformation resulting from violent use, excessive force during battery attachment or detachment, or improper alignment of the battery onto the plate is specifically excluded from warranty coverage. This includes snapped, crushed, or pushed-in contact pins caused by user mishandling.
(6) Electrical or thermal damage (including melted plastic around electrodes, burnt contacts, or discoloration from heat) that is determined to be caused by a third-party battery's internal short circuit, over-current draw, overheating, or defective connector design shall not be covered under this warranty. Such conditions are the responsibility of the battery manufacturer.
