› 100W COB LED Fresnel studio light
› Fanless, absolutely silent
› 12-26° Flood/Spot angle adjust
› 60,000Lux@1m high bright hard light
› 5600K daylight color temperature
› 0-100% flick-free dimming
› CRI Ra 96, TLCI 97
› DMX512 In & out dimmer control
› USB power out for wireless DMX receiver
› LCD display color, dimmer and DMX addr
› PowerCON TRUE1 AC in and loop out
› 4-leaf metal barn doors and Yoke bracket
100W Fanless Fresnel Light
Brighter, harder, absolutely silent
FL-C100 is a 100W COB-LED fresnel light of daylight color
temperature, 60,000Lux @1m high bright, with DMX
control, high CRI/TLCI and accurate color performance,
and no fan, no noise at all, for broadcast studio, theatre,
film set install applications.
12°-26° Spot/Flood Adjust
FL-C100 outputs 12°-26° beam angle by adjusting
position of LED board internally, 0 to 100% PWM digital
dimming, smoothly and non-flickering.
IEC 62471 Photobiological Safe Certificated
The light has been tested and certificated as “Exempt - No Photobiological Hazard” by the IEC 62471:2008 standard, without the risk of ultraviolet radiation, high energy blue light, flicking. In specific locations such as churches, museums, and ancient buildings, using this lighting fixture can effectively prevent the fading and peeling of mural artifacts, thereby protecting cultural heritage.
5600K Daylight Color Temp
FL-C100 outputs accruate and stable 5600K color
temperature for daylight studio application.
Accurate Color Render
CRI 96; TLCI 97
CRI (Color Rendering Index) is a measure of the
ability of a light source to reveal the colors of various
objects faithfully in comparison with a natural light
source. And TLCI (Television Lighting Consistency
Index) is special for the color reveal ability by camera
sensor. Max value 100.
The normal LED light has 80-85 CRI or TLCI, while
FL-C100 offers the ultra high CRI at 96 and TLCI at
97, and will not lose the object original colors.
DMX, AC IN & LOOP
FL-C100 provides 5-pin XLR DMX512 in and out,
with a 5V USB-A socket to power wireless DMX
receiver. For convenient studio installation, the
FL-C100 provides PowerCON True 1 AC in and loop
out sockets, which will loop through more than 25x
FL-C100 lights under 220V AC voltage, and 13x
FL-C100 lights under 110V voltage.
4-leaf Metal Barn Door
FL-C100 is equipped with 4-leaf metal barn doors,
dismountable and rotatable. The light also provides
a special black-out cloth to prevent the light
leakage.
Optional Diffuser Box
Provide Octangle Diffuser Box as optional
accessory. Compatible with all 90mm
diameter fresnel lights includes SWIT
FL-C100, FL-C100D, FL-C200D, FL-C400D,
etc, with dual diffuser layers and eggcrate.
Part Number: LA-BC90.
LED | COB Chip-on-board LED |
Spot angle | 12° - 26° adjust |
Illuminance | 60,000Lux@1m/Spot |
Color Temperature | 5600K |
CRI | 96 |
TLCI | 97 |
Power | 100W |
USB | 5V USB-A power out |
DMX | DMX512, 5pin XLR IN & OUT |
AC Power | PowerCON TRUE1 AC 100-240V 50/60Hz input & output |
Dimension | 160×160×364mm; Shipping carton 525×330×315mm |
Weight | 5.2kg; With package 7.5kg |
MSRP
MSRP
MSRP
-
PowerCON TRUE1 AC cable
-
Barn door kit
-
Black out cloth
-
Safety rope
-
LA-BC90
Octangle Diffuser Box with dual diffuser layers and eggcrate, Compatible with all 90mm diameter fresnel lights includes SWIT FL-C100, FL-C100D, FL-C200D, FL-C400D, etc -
LA-POC100
2 control cups for pan and tilt, 5/8" baby-pin female & 1-1/8" junior pin male head. Dedicated size for SWIT FL-C100 and FL-C100D studio fresnel lights -
PA-LC20
PowerCON TRUE1 loop out cable, 2meters, 16A load, AC 220V: Max 25x FL-C100 looped AC 110V: Max 13x FL-C100 looped
-
FL-C100D
100W Bi-color Fanless Studio Fresnel Light
COB-LED, 12-26° adjust, 55,000Lux@1m, 2700-6500K, CRI 97, TLCI 99, no fan, no noise
1. Warranty Period
We provide 1 year conditional warranty for lighting products.
2. Exclusions from Warranty Coverage
The following damages, malfunctions, failures, or safety incidents, including but not limited to damage to LED emitters, circuits, or housings, personal injury, or property loss, are not covered under warranty, and SWIT shall bear no liability therefor:
(1) Non-Compliance with Operating Procedures
Operation, installation, or removal of equipment and accessories not in accordance with the User Manual; forcible removal of connection cables or power cables; obstruction of heat dissipation vents; direct visual exposure to LED emitters; failure to follow the prescribed sequence for startup/shutdown or wiring.
(2) Non-Compliant Power Supply and Accessories
Use of non-original SWIT power supplies, power cables, chargers, optical accessories, or other uncertified third-party accessories; powering the product with third-party power adaptors; use of extension cables or power adaptors with mismatched rated parameters.
(3) Unauthorized Modification and Repair
Unauthorized disassembly, modification, or repair of the equipment; tampering with core components or circuits; failure to contact SWIT authorized after-sales service upon equipment malfunction, resulting in unauthorized repair or aggravated damage by non-authorized personnel.
(4) Misuse and Adverse Environmental Conditions
Damage resulting from dropping, impact, compression, puncture, water immersion, exposure to high temperatures or direct sunlight, extreme cold, humidity, excessive dust, or other non-normal use environments or human-inflicted damage.
(5) Failure to Address Abnormal Conditions
Continued operation despite abnormal conditions such as overheating, abnormal odor, or abnormal noise, resulting in damage or safety incidents; use of damaged or malfunctioning accessories or batteries in violation of regulations.
(6) Out-of-Specification and Incompatible Use
Operation beyond the equipment's rated parameters; use in incompatible systems or environments; failure to implement protective measures during outdoor use, resulting in damage from severe weather conditions.
(7) Force Majeure and External Factors
Damage caused by irresistible factors (including but not limited to earthquake, flood, or typhoon), sudden voltage fluctuations, or external circuit short circuits.
(8) Natural Wear and Tear
Normal aging of LED emitters, wear of accessories, and other natural degradation of the product.
(9) Improper Storage
Failure to store equipment and accessories in accordance with prescribed specifications, resulting in moisture ingress, dust accumulation, or component corrosion.
(10) Non-Authentic Products and Ineligibility
Products not purchased through official SWIT channels, or products with altered or missing serial numbers that preclude verification of authenticity and warranty eligibility.
(11) Liability Disclaimer
All risks and consequences arising from improper use, human factors, or external factors shall be borne entirely by the user.
(12) Non-Quality Defects
Any damage or breakdown not caused by the product's design, workmanship, or manufacturing quality.
